Stainless steel brake lines for E46 323i/325i/328i/330i and M3 models to upgrade all of the rubber lines on the E46 to Teflon/stainless and heat-reflective sheathing.
With lots of racing years under our belts, the feedback from our team is that most brake line failures occur near the caliper, where the Teflon liner is baked by over 1,000+°F of radiated heat. To prevent damage to the lines caused by normal track temperatures, we have added a protective heat shield on each of our caliper lines that reflects radiant heat, a solution proven through the years on our in-house race cars.
As in any performance application, replacing squishy rubber parts with a performance piece will increase response and feel – brakes are no different. Stock rubber brake hoses expand under pressure, requiring increased fluid volume and greater pedal travel for the desired stopping force. What is often misinterpreted as brake fade or fluid boiling can be the brake lines expanding under pressure. Our BimmerWorld Teflon/Braided Stainless Steel Brake Lines reduce this dramatically and greatly improve pedal feel.
BimmerWorld Stainless Brake Lines feature a non-expansive Teflon® center core, surrounded by braided stainless steel for durability and abrasion resistance. Lines are sheathed with a clear plastic cover for a clean look and to prevent debris from working into the stainless braids. The heat shielding sleeve is also removable and the clear sheathing permits visual inspection of the lines to check for wear or discoloration (evidence of heat damage). Line ends are a heavy-duty steel with swaged line fittings that provide a secure connection. In our years of experience in racing and the performance BMW industry, we have seen several specific failures from typical stainless brake lines. Our fittings are designed to eliminate the common stress/failure point.
All of our BimmerWorld V3 lines are tested to at least 4,500psi, and tagged with our DOT approval number. The DOT stamp on each of our lines ensures that every line is made and tested to DOT standards, not just “made to DOT standards” or “DOT compliant” like many other brands.
NOTE: Like any car part or performance part, brake lines are not indestructible, and will age and fatigue. Extreme heat from track use will degrade all types of brake lines the quickest but there are other elements that will contribute to wear. To avoid serious injury, or worse, we recommend inspecting all brake components regularly and replacing lines every 100 hours of track use (typically 2-4 years). Also, never let the brake caliper hang from just the brake line.
Our stainless line sets include all necessary brackets, grommets, and sealing washers. Custom line sets also available, including axle sets to complement big-brake kits and AN lines for racing applications – please inquire.
E46 (99-05) > 320i
E46 (99-05) > 323Ci
E46 (99-05) > 323i
E46 (99-05) > 325Ci
E46 (99-05) > 325i
E46 (99-05) > 328Ci
E46 (99-05) > 328i
E46 (99-05) > 330Ci
E46 (99-05) > 330i
E46 (99-05) > M3